工業煙氣超低排放改造中，常采用濕法脫硫進行煙氣凈化，凈化后的煙氣從煙囪排出，常常會產生嚴重的拖尾現象，有時可達數百米。凈煙氣雖已達到超低排放水平，但造成了視覺污染和水資源的大量浪費，采用氨法脫硫的，有部分“硫銨雨”則會對周邊設備造成嚴重腐蝕。由于國家政策不再?gòu)?qiáng)制性要求企業對煙氣進行脫白治理，那么從脫硫系統的設計方面進行改良，避免煙氣拖尾現象成為必要舉措。
In the transformation of ultra-low emission of industrial flue gas, wet desulfurization is often used for flue gas purification. The purified flue gas is discharged from the chimney, which often produces serious tailing, sometimes up to hundreds of meters. Although the net flue gas has reached the ultra-low emission level, it has caused visual pollution and a large waste of water resources. If ammonia desulfurization is adopted, some "ammonium sulfate rain" will cause serious corrosion to the surrounding equipment. Since the national policy no longer requires enterprises to de whiten the flue gas, it is necessary to improve the design of desulfurization system to avoid flue gas tailing.
下面以氨法脫硫?yàn)槔?，分析煙氣拖尾的主要原因?/div>
Taking ammonia desulfurization as an example, the main causes of flue gas tailing are analyzed.
1.物理因素
1. Physical factors
經過氨法脫硫系統的高溫?zé)煔馀c其隔斷液相接觸后逐步達到飽和狀態。攜帶著液滴的煙氣排入大氣后凝結成白色，形成視覺上的拖尾效果，環境溫度越低、煙氣濕度越大拖尾現象越嚴重。
After the high-temperature flue gas of ammonia desulfurization system contacts with its partition liquid, it gradually reaches the saturation state. The flue gas carrying droplets condenses into white after being discharged into the atmosphere, forming a visual tailing effect. The lower the ambient temperature and the greater the flue gas humidity, the more serious the tailing phenomenon is.
2.氨逃逸
2. Ammonia escape
氨法脫硫過程中，作為脫硫劑的液氨或氨水會分解為氣體氨與水，由于氣體氨不易與煙氣發生反應，會與煙氣一起從煙囪排出，這就是氨逃逸，尤其是噴氨過量時，會加劇氨逃逸的現象，煙囪排出的煙羽會更長。
In the process of ammonia desulfurization, liquid ammonia or ammonia water as desulfurizer will be decomposed into gas ammonia and water. Because gas ammonia is not easy to react with flue gas, it will be discharged from the chimney together with flue gas, which is ammonia escape. Especially when excessive ammonia injection will aggravate the phenomenon of ammonia escape, and the smoke plume discharged from the chimney will be longer.
3.氣溶膠
3. Aerosol
氣溶膠是指液體或固體小質點在大氣中分散懸浮形成的膠體分散體。氨法脫硫后的氣溶膠主要成分是銨鹽類，煙氣中氣溶膠含量越大，煙氣的拖尾現象就越嚴重。
Aerosol refers to the colloidal dispersion formed by the dispersion and suspension of small liquid or solid particles in the atmosphere. The aerosol after ammonia desulfurization is mainly composed of ammonium salts. The greater the aerosol content in the flue gas, the more serious the tailing phenomenon of the flue gas.
針對煙氣拖尾的各種原因，可以合理優化脫硫系統的工藝設計，減少或避免煙氣拖尾現象。
For various reasons of flue gas tailing, the process design of desulfurization system can be reasonably optimized to reduce or avoid flue gas tailing.
以上就是為大家介紹的有關
濕法脫硫的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務
http://The above is the detailed introduction of wet desulfurization, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2022-04-15
